TEST BANK FOR OSHA: SAFE WORK PRACTICES EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+

TEST BANK FOR OSHA: SAFE WORK
PRACTICES EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED
ANSWERS WITH RATIONALES (VERIFIED
ANSWERS) |ALREADY GRADED A+
Mauricio is preparing to sandblast the coating off a pipeline located in a dry, confined space. What
safe work practices should he use to ensure a safe hot work environment? - -Make
sure that equipment is not placed in front of ladders
-Keep equipment out of passageways between hot work areas and ladders
-Obtain a permit for hot work
Oxygen - fuel gas cylinders must not be stored near ______ materials - highly
combustible b
Elliot is a gas welder for a manufacturing company. Every summer, the plants shuts down for two
weeks. As Elliot leaves that last Friday before the shutdown, he turns off the torch and posts
appropriate warnings to keep the second shift operators away from the machine he was repairing.
At the end of the first week of the shutdown, there was a small explosion in the area in which Elliot
was working. An investigation revealed that the welding gas leaked and caused a buildup. What
could Elliot have done to prevent this? - Shut off the welding gas at the tanks.
To prevent trip hazards or blocking of exits when setting up and preforming hot work, keep all
equipment clear of: - -Passageways
-Stairways
-Emergency exits
Maintaining a safe hot work environment often involves compliance with regulations and permits
regarding issues such as: - -Permits for confined space entry
-Fall protection and prevention
-Lockout/tagout processes
The purpose of using a protective welding scree is to do which of the following? -
Protect coworkers from the glare of welding
If equipment is left unattended or is not being used for a long period, what steps might need to be
done to follow safe work practices? - -Disconnect all power sources to equipment
-Shut off fuel supply at the tank or other source
-Ensure equipment's fuel is disconnected
Which two items are approved methods for keeping cylinders and fuel-gas cylinders separated when
they are stored in the same storage area? - -A minimum distance of 20 feet between
the two types
-A noncombustible partition with fire resistance rating of at least 30 minutes between the two types.
When you have finished a hot work job, it is considered best practice to post an appropriate warning
in the area in order to do which of the following? - -Protect coworkers from potential
burns
-Keep coworkers away from your area
Which of the following should an individual who preforms hot work do to ensure a safe work
environment? - -Be aware of all potential hazards
-Use and maintain proper PPE
-Follow all safe work practices established by the facility
Regardless of severity, if an injury occurs while preforming hot work, you should: - -
Report it immediately
-Obtain medical attention if needed.
James is working outside in a bucket truck. Which of the following should he do to help ensure his
safety ans the safety of his coworkers? - -Look up and around before extending the
bucket
-Maintain a minimum distance of 10 feet from live, overhead power lines
Qualified or Unqualified Workers - -Follow safe work practices around electrical
equipment
-Keep at least 10-foot distance from live, overhead power lines
-Obey all warning signs, tags, or permits on site